Written Estimate First
Nothing is repaired until you approve it

Talk to an expert
(469) 638-3215When a Bosch dishwasher shows E09, it has found a problem with the heater built into its pump assembly. Water may stay cold, and the dishes come out greasy or wet.
Bosch lists E09 as a heat pump internal heater fault. Bosch doesn’t define the term on its code pages; in Bosch parts listings, the dishwasher “heat pump” is the circulation pump with a built-in heater, which has nothing to do with the heat pump in a dryer or an air conditioner. Bosch’s one owner step is to cut power at the circuit breaker for 30 seconds and restore it. If E09 persists after that, Bosch says to contact its customer support. Bosch uses the same heater description for E20, and E21 for a heat pump that is blocked. Source: Bosch dishwasher code list (opens in a new tab).
Nothing is repaired until you approve it
Serving homes across Dallas–Fort Worth
90 days, 6 months for members
Toward the repair if you go ahead
Open daily, 8–8
What usually comes with it.
Bosch names the heater; these are what a technician tests.
This is the only owner step Bosch gives for E09.
Switch off the circuit breaker that feeds the dishwasher and leave it off for 30 seconds.
Turn the breaker back on and start a normal cycle with a light load.
If the cycle finishes with hot water and no code, the fault was momentary. If E09 returns, book service.
Schedule a repair if:
More help, including other Bosch codes:
Bosch dishwasher E24 error codeBosch dishwasher E25 error codeBosch dishwasher E15 error codeBosch refrigerator E02 error codeBosch oven E11 error codeAll Bosch appliance repairBosch dishwasher code listWritten estimate first
We test the Bosch pump assembly, its heater and the control, then quote the repair before ordering parts.

Bosch lists E09 as a heat pump internal heater fault or error.
Bosch’s code pages don’t define the term. In Bosch parts listings, the dishwasher “heat pump” is the circulation pump with a built-in heater, which moves the wash water and warms it. It is a different thing from a heat pump dryer.
Bosch says to cut power at the breaker for 30 seconds, then restore it. If the code stays, call support or book a technician.
Bosch lists E20 with the same heater description, E21 for a blocked heat pump and E12 for limescale in the heat pump. See our E12 guide.
ALAS Appliance Repair
Written Estimate First
Diagnostic Credited
Real Warranty
Based in Plano