Skip to content
ALAS Appliance Service

KitchenAid Dishwasher F8E5: Water Won’t Stop Coming In

F8E5 is one of the few KitchenAid dishwasher codes that needs action right away. KitchenAid ties it to a fill valve stuck open, which can keep feeding water into the machine.

— or call us directly —

Call or text us(469) 638-3215

🔒 No credit card required

What F8E5 Means on a KitchenAid Dishwasher

KitchenAid lists the potential cause of F8E5 as “Fill Valve Stuck Open.” The water inlet valve should close once the tub has enough water; when it doesn’t, water keeps coming in. KitchenAid’s instructions are specific: shut off the water to the dishwasher if you can, press Cancel once to silence the alarm, close the door and keep it closed, and leave the power on. Only if you can’t shut off the water should you turn the power off. Source: KitchenAid F8E5 (opens in a new tab).

Written Estimate First

Nothing is repaired until you approve it

Based in Plano

Serving homes across Dallas–Fort Worth

Real Warranty

90 days, 6 months for members

Diagnostic Credited

Toward the repair if you go ahead

Evenings and Weekends

Open daily, 8–8

KitchenAid’s Steps for F8E5

Follow these exactly. They differ from most dishwasher codes.

1

Shut off the water

Close the valve that feeds the dishwasher, usually the hot water valve under the kitchen sink.

2

Silence and close

Press Cancel once to stop the alarm, then shut the door and keep it closed. KitchenAid says not to turn off the power at this point.

3

If you can’t reach the valve

KitchenAid’s fallback is to turn off the power to the dishwasher instead. Then towel up any water and keep children away from wet floors.

Once the water is off, book a repair. The inlet valve needs testing before the dishwasher runs again.→

When to Call a Technician

Schedule a repair if:

  • Any time F8E5 appears
  • Water enters with the door shut
  • The sink valve won’t close fully
  • Water has reached the floor

Written estimate first

Water Shut Off and Waiting?

We test the inlet valve and its control signal, replace what failed and run a full fill to confirm it closes. You get a written estimate first. After-hours visits cost extra.

  • Diagnostic fee credited toward the repair
  • 90-day warranty, 6 months for members
  • Open daily, 8 AM–8 PM
Schedule Repair
Samsung refrigerator, washer and dryer

KitchenAid F8E5 Questions

That is the order KitchenAid gives: shut off the water, silence the alarm, close the door and leave the power on. Its article makes cutting power the fallback for when the water can’t be shut off, so follow it in that order.

Not until the valve is checked. A valve that stuck once can stick again and overfill while nobody is watching.

No. F8E4 means water was found in the drip tray. F8E5 points to the fill valve stuck open. Both involve water where it shouldn’t be.

In most DFW kitchens it is a small valve on the hot water line under the sink. Turn it clockwise to close it.

ALAS Appliance Repair

Get the KitchenAid Fill Valve Replaced

  • Written Estimate First
  • Diagnostic Credited
  • Real Warranty
  • Based in Plano
Schedule RepairCall Now