Skip to content
ALAS Appliance Service

Frigidaire Dishwasher i20: Water Left in the Tub

“Frigidaire dishwasher not draining” is one of the most searched Frigidaire problems, and i20 is the code that goes with it. Here is Frigidaire’s checklist.

— or call us directly —

Call or text us(469) 638-3215

🔒 No credit card required

What i20 Means on a Frigidaire Dishwasher

Frigidaire says i20 indicates the dishwasher is not draining properly; its code guide calls it “unit did not drain completely”. Frigidaire’s checks: on a new install tied to a garbage disposer, the disposer knockout plug must be removed; the drain hose can’t be blocked, pinched or restricted; the hose must reach at least 32 inches above the floor; and the glass trap and filter must be clear of food soil. To reset, hold Cancel, switch off the breaker, or unplug the dishwasher for 3 minutes. Source: Frigidaire i20 (opens in a new tab).

Written Estimate First

Nothing is repaired until you approve it

Based in Plano

Serving homes across Dallas–Fort Worth

Real Warranty

90 days, 6 months for members

Diagnostic Credited

Toward the repair if you go ahead

Evenings and Weekends

Open daily, 8–8

Clearing i20 Step by Step

Turn the dishwasher off before reaching into the tub.

1

Clean the glass trap and filter

Lift out the glass trap and filter at the bottom of the tub, rinse off food soil and lock them back in.

2

Check the hose under the sink

Look for a kink or pinch, and make sure the hose loops at least 32 inches above the floor before it drops to the drain.

3

Reset and run again

Hold Cancel, flip the breaker, or unplug the dishwasher for 3 minutes, then run a short cycle.

Water still standing after these checks? The drain pump needs a look.→

When to Call a Technician

Schedule a repair if:

  • i20 returns with a clean filter
  • The hose is routed correctly and still clogs
  • You hear the pump hum without draining
  • A new install needs the knockout plug removed

Written estimate first

Standing Water Won’t Clear?

We test Frigidaire drain pumps, hoses and check valves and give you a written price first.

  • Diagnostic fee credited toward the repair
  • 90-day warranty, 6 months for members
  • Open daily, 8 AM–8 PM
Schedule Repair
Samsung refrigerator, washer and dryer

Frigidaire i20 FAQs

Frigidaire says the dishwasher is not draining properly, or did not drain completely.

Frigidaire says at least 32 inches above the floor, which keeps sink water from flowing back into the dishwasher.

Frigidaire lists three ways: press and hold Cancel, switch off the breaker, or unplug the dishwasher for 3 minutes.

They are related. i40 means a clogged filter or sump, which can cause poor draining. See our i40 guide.

ALAS Appliance Repair

Get Your Frigidaire Dishwasher Draining

  • Written Estimate First
  • Diagnostic Credited
  • Real Warranty
  • Based in Plano
Schedule RepairCall Now