Written Estimate First
Nothing is repaired until you approve it
GE Washer UE Code: What It Means and How to Fix It
Seeing UE on your GE washer, or the Spin light blinking? Here is what GE says it means, how to fix it yourself, and when it points to a repair.
What Does UE Mean on a GE Washer?
GE says UE means the load is unbalanced. A blinking Spin light means the washer detected an out-of-balance load and is correcting it so it can finish the cycle. Most of the time, redistributing the load and leveling the washer fixes it. GE says codes vary by model, so confirm yours in your Owner’s Manual. Source: GE washer help messages (opens in a new tab).
Based in Plano
Serving homes across Dallas–Fort Worth
Real Warranty
90 days, 6 months for members
Diagnostic Credited
Toward the repair if you go ahead
Evenings and Weekends
Open daily, 8–8
Common Signs With UE
You may notice one or more of these along with the code.
What Causes GE UE?
These are the causes GE lists and the parts a technician checks.
How to Fix GE UE
Try these steps in order.
Redistribute the load
GE says to spread the clothes evenly. Pair a single heavy item, like a bath mat, with a few towels.
Run Drain & Spin
If the load is wetter than normal, GE says to redistribute it and run Drain & Spin (or Spin).
Level the washer
GE says to make sure the washer is level. Adjust the feet so it doesn’t rock.
When to Call a Technician
Schedule a repair if:
- UE returns with normal loads
- The washer bangs or walks when level
- You hear a roar during spin
- The tub looks loose or tilted
Related GE Washer Pages
GE washer repairMore help, including other GE codes:
GE washer H2O SUPPLY error codeGE washer dE and Lid LockedGE oven F2 error codeGE dishwasher C1 error codeAll GE appliance repairGE top-load washer won’t spinWritten estimate first
Need Help With GE Washer UE?
ALAS technicians repair GE washer suspension, dampers and drive parts, and give you a written estimate before any repair.
- Diagnostic fee credited toward the repair
- 90-day warranty, 6 months for members
- Open daily, 8 AM–8 PM
GE Washer UE FAQs
GE says UE means the load is unbalanced. Redistribute it evenly and make sure the washer is level.
GE says a blinking Spin (or Spin & Rinse) light means the washer detected an out-of-balance load and corrected it. If clothes are wetter than normal, redistribute them and run Drain & Spin.
If the washer is level and the loads are normal, worn suspension, dampers or a drive problem may be the cause, and a technician should check it.
GE says to wait out normal pauses, close the lid, set the Options knob on an option and rebalance the load. If the pump and motor run but the tub won’t spin, GE says a service call is needed.
ALAS Appliance Repair
Get Your GE Washer Spinning Smoothly
Written Estimate First- Diagnostic Credited
- Real Warranty
- Based in Plano