Business Profile
Whirlpool Dishwasher Repair Service
Whirlpool dishwasher holding water, leaving dishes dirty, leaking or flashing the Clean light? Our technicians read the code, find the failed part and repair it in your kitchen across Dallas–Fort Worth.
- Written estimate before any work
- Flashing-light code diagnosis
- Drain, fill, leak and control repair
- Open 7 days a week
Business Profile
4.8
288 reviews
Book Your Whirlpool Dishwasher Repair
Whirlpool Dishwasher Repair for Built-In Models
ALAS repairs Whirlpool built-in dishwashers in homes across Dallas–Fort Worth, including models with a third rack, adjustable racks and front or hidden controls. When a Whirlpool dishwasher detects a fault, it shows an F and E code on the display or flashes the Clean light in two groups: count the first group for the F number and the second for the E number. F9E1 means a long drain, F8E4 means water in the drip tray and F6E3 means too many suds, and many of these trace back to a clogged filter, drain hose or the wrong detergent. Your technician checks the filters, sump, drain pump, drain hose, fill valve, float switch, wash motor and controls on your model before naming the failed part. You get the diagnosis and a written price first, and nothing is repaired until you approve it.
Whirlpool built-in dishwasher model numbers start with WDT. Whirlpool puts the model label on the left side of the tub frame, visible when the door is open. Having the model number and the flash pattern of the Clean light ready helps us bring the right parts.
Common dishwasher problems
Common Whirlpool Dishwasher Problems and What Causes Them
These are the Whirlpool dishwasher problems we are called about most, with the parts a technician checks first and the codes that often appear with them.
| Symptom | Common causes a technician checks | Guide |
|---|---|---|
| Not draining or water left in the bottom (F9E1) | Clogged filters or sump, kinked drain hose, garbage disposer knockout plug not removed, blocked air gap, failed drain pump. | Whirlpool F9E1 guide |
| Water in the drip tray or leak alarm (F8E4) | Loose water supply connection, leaking inlet valve, excess suds, a door or tub seal leak, float switch disconnected. | Whirlpool F8E4 guide |
| Dishes not getting clean | Dirty filters, clogged spray arms, low water fill, hard-water film, weak wash motor or overloaded racks blocking the spray. | Dishwasher repair |
| Not filling or H2O on the display | Water supply turned off, kinked supply line, clogged inlet screen, failed fill valve (F8E2) or float switch problem (F6E4). | Dishwasher repair |
| Too many suds (F6E3) | Dish soap, hand soap or laundry detergent used by mistake, too much detergent, or the rinse aid cap left off. | Whirlpool F8E4 guide |
| Buttons not responding (F2E1) | A stuck key or control panel fault, moisture in the console, or a control board problem. | Whirlpool appliance repair |
| Humming, grinding or no wash sound | Glass or debris jamming the pump impeller, failed wash motor (F7E2) or drain pump. | Dishwasher repair |
| Not drying | Rinse aid empty, heating element or high-limit fault, vent problem, or plastic items that don’t hold heat. | Dishwasher repair |
What Our Whirlpool Dishwasher Repair Covers
We diagnose and repair the parts that most often fail on Whirlpool dishwashers, using parts matched to your model number.
Drain Pump and Drain Repair
Pumps, hoses and sumps behind F9E1 and standing water.
Leak and Drip Tray Repair
Supply connections, valves and seals behind F8E4 leak codes.
Fill Valve and Float Switch Repair
Fill valves and floats behind H2O, F8E2 and F6E4.
Wash Motor and Spray Arm Repair
Motors and spray arms behind poor cleaning and F7E2.
Control Panel and Board Repair
Keypads and boards behind F2E1, F1E1 and dead controls.
Heating and Drying Repair
Heating elements and high limits on dishwashers that won’t dry.
Door Latch and Hinge Repair
Latches, springs and hinges on doors that won’t close or drop open.
Filter and Sump Cleaning
Clogged filters and sumps behind odors and dirty dishes.
Repair or replace
Is Your Whirlpool Dishwasher Worth Repairing?
Many Whirlpool dishwasher problems come down to a clogged filter, drain hose or fill valve, and those are inexpensive repairs. A drain pump, inlet valve or control panel is a single part. A failed wash motor plus control board, or a rusted tub, on an older dishwasher is when replacement is worth weighing. We give you the cost first and tell you plainly when a new dishwasher makes more sense.
Usually worth repairing
- The dishwasher is under about 8 to 10 years old
- The problem is a filter, hose, pump, valve or keypad
- The tub and racks are free of rust
- The repair costs well under the price of a new dishwasher
Worth weighing carefully
- The dishwasher is more than 10 years old
- The tub is rusted through or leaking
- The wash motor and control board have both failed
- Repair cost is more than half the price of a new dishwasher
Thinking about a new dishwasher? Compare energy and water use with ENERGY STAR certified dishwashers
Protect Your Home.
Choose Your Plan.
Preventive maintenance, priority service, and repair savings — all under one membership.
MonthlyAnnual
Silver
Essential Home Care
$49/mo
1HVAC
5Appliances
6moWarranty
- ✓1 HVAC system — spring & fall visits
- ✓Up to 5 major appliances
- ✓1 annual appliance check-up
- ✓15% off all repair labor
- ✓HVAC diagnostic just $69
Gold
Premium Home Care
$79/mo
2HVAC
8Appliances
6moWarranty
- ✓Up to 2 HVAC systems covered
- ✓Up to 8 major appliances
- ✓1 free HVAC diagnostic/year
- ✓20% off all repair labor
- ✓Priority scheduling
Platinum
Elite Home Protection
$129/mo
3HVAC
12Appliances
6moWarranty
- ✓Up to 3 HVAC systems covered
- ✓Up to 12 major appliances
- ✓Twice-yearly appliance maintenance
- ✓30% off all repair labor
- ✓Premium member routing
Water leak
Whirlpool Dishwasher Leaking?
Water under the dishwasher can soak cabinets and subfloors without showing for days. Turn off the water supply under the sink and call us. On F8E4, Whirlpool says to press Cancel once, keep the door closed and leave the power on so the dishwasher can drain itself, unless water is reaching an outlet or wiring, in which case switch off the breaker first. After-hours emergency service is available for an added fee.
How it works
How Our Whirlpool Dishwasher Repair Works
Book online or call
Tell us the model number and what the dishwasher is doing, including the code or the Clean light flash pattern.
Diagnosis at your home
Your technician checks the filters, sump, drain pump and hose, fill valve, float switch, wash motor, heater and controls to find the part that failed.
Written estimate
You get the price in writing before any work starts. Nothing is repaired until you approve it.
Repair, test and warranty
We complete the repair, run a cycle to confirm it fills, washes and drains without leaking, and write the warranty terms on your invoice.
Troubleshooting
Whirlpool Dishwasher Error Codes and Guides
What the most common Whirlpool dishwasher codes mean and what to check.
Signs Your Whirlpool Dishwasher Needs Repair
Where we work
Whirlpool Dishwasher Repair Service Area
Looking for Whirlpool dishwasher repair near you? ALAS provides Whirlpool dishwasher repair in Plano, Frisco, McKinney, Allen, Prosper, Lucas, Parker, Richardson, Dallas, Highland Park, University Park, Coppell, Flower Mound, Southlake, Westlake, Colleyville, Keller, Grapevine, Argyle and Trophy Club. Find your city below or check your ZIP code.
PlanoDishwasher repairFriscoDishwasher repairMcKinneyDishwasher repairAllenDishwasher repairProsperDishwasher repairLucasDishwasher repairParkerDishwasher repairRichardsonDishwasher repairDallasDishwasher repairHighland ParkDishwasher repairUniversity ParkDishwasher repairCoppellDishwasher repairFlower MoundDishwasher repairSouthlakeDishwasher repairWestlakeDishwasher repairColleyvilleDishwasher repairKellerDishwasher repairGrapevineDishwasher repairArgyleDishwasher repairTrophy ClubDishwasher repair
Whirlpool Dishwasher Repair Questions
Start with the filters: Whirlpool says to remove and rinse them and check the sump. Then check the drain hose for kinks and a high loop or air gap, and if the dishwasher drains into a new garbage disposer, make sure the knockout plug was removed. If water still won’t drain, the drain pump usually needs repair. Our F9E1 guide has the steps.
Whirlpool says the Clean light flashes in two groups. Count the first group for the F number, wait for the 1 to 2 second pause, then count the second group for the E number. For example, 9 flashes, a pause and 1 flash is F9E1. See Whirlpool’s code reading guide (opens in a new tab).
Whirlpool calls F9E1 a long drain: the dishwasher isn’t draining in the expected time. A clogged filter, kinked drain hose, disposer plug or air gap is the usual cause, and a failed drain pump is next. See our F9E1 guide.
Whirlpool says F8E4 means water has been detected in the drip tray under the dishwasher, which usually means a leak. Our F8E4 guide explains Whirlpool’s steps, including why you should keep the door closed and the power on while it drains.
Whirlpool’s reset is to cut power for 30 seconds: unplug the dishwasher, or switch off the breaker if it is hard-wired, then restore power. If the same code returns after a reset, the part behind it needs repair.
Clean the filters first, since a clogged filter is the most common cause. Make sure the spray arms turn freely and aren’t blocked by tall items, use dishwasher detergent only, and keep rinse aid filled. If dishes are still dirty, low fill, a weak wash motor or a failed heater may be the cause.
Often, yes. Drain pumps, fill valves, keypads and door parts are single repairs. If the dishwasher is more than about 10 years old and the tub is rusted or the motor and board have both failed, replacement may make more sense, and your technician will say so.
ALAS is an independent repair company, not a Whirlpool authorized service provider, so warranty claims go through Whirlpool (warranty information (opens in a new tab)). We repair Whirlpool dishwashers that are out of warranty or that you choose to have repaired independently.
Yes. KitchenAid, Maytag and Amana are Whirlpool Corporation brands, and we repair their dishwashers as well. Tell us the brand and model number when you book.
We repair Whirlpool dishwashers across Dallas–Fort Worth, including Plano, Frisco, McKinney, Allen, Dallas, Richardson, Coppell, Southlake, Keller and Grapevine. Enter your ZIP code in the service area section to check coverage.